Traxxas Slash 4x4 1:10 Tuning Parts - page 3

Differential Ring Gear & Pinion Gear rear

Traxxas Differential Ring Gear and Pinion Gear, machined spiral cut, rear

47,50 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 1

Drag Link Aluminium blue

Traxxas drag link, machined 6061-T6 Aluminium, blue-anodized

11,40 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Drag Link Aluminium green

Traxxas drag link, machined 6061-T6 Aluminium, green-anodized

11,40 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Drag Link Aluminium orange

Traxxas drag link, machined 6061-T6 Aluminium, orange-anodized

11,40 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Drag Link Aluminium red

Traxxas drag link, machined 6061-T6 Aluminium, red-anodized

11,40 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Driveshafts Front, steel-spline constant-velocity

Traxxas extreme heavy-duty steel driveshafts, front, steel-spline constant-velocity, complete assembly

Contents: 2 pieces
Fits the following models: Hoss 4x4, Rustler 4x4, Stampede 4x4, Slash 4x4

Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxas Hoss are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically for monster truck applications, these shafts are built to withstand the brutal torque of Hoss’ 540XL motor and the massive grip of the huge Sledgehammer tires. Traxxas’ unique, splined telescoping design delivers full-range articulation, so there is never a need to limit suspension travel. Since they are made by Traxxas, you can count on easy installation and perfect fit in your Traxxas model.

84,65 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 1

Driveshafts Front, steel-spline constant-velocity

Traxxas front driveshafts, steel-spline constant-velocity, complete assembly
Content: 2 pieces

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer.
The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements,
and the U-joint pins are held captive so you never have to worry about losing a pin.
Gleaming nickel-plated shafts and black silicone boots add a custom look.

84,70 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Driveshafts Rear, steel-spline constant-velocity

Traxxas extreme heavy-duty steel driveshafts, rear, steel-spline constant-velocity, complete assembly

Contents: 2 pieces
Fits the following models: Hoss 4x4, Rustler 4x4, Stampede 4x4, Slash 4x4, Slash 2WD, Ford F-150 Raptor

Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxas Hoss are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically for monster truck applications, these shafts are built to withstand the brutal torque of Hoss’ 540XL motor and the massive grip of the huge Sledgehammer tires. Traxxas’ unique, splined telescoping design delivers full-range articulation, so there is never a need to limit suspension travel. Since they are made by Traxxas, you can count on easy installation and perfect fit in your Traxxas model.

84,70 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 1

Driveshafts Rear, steel-spline constant-velocity

Traxxas rear driveshafts, steel-spline constant-velocity, complete assembly
Content: 2 pieces

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer.
The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements,
and the U-joint pins are held captive so you never have to worry about losing a pin.
Gleaming nickel-plated shafts and black silicone boots add a custom look.

84,70 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Gear Set Center Differential

Traxxas center differential gear set, 2x output gears, 2x spider gears and spider gear shaft

16,10 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 1

Gear Set Center Differential

Traxxas Gear Set Center Differential, 4 x spider gears and 2 x spider gear shaft

11,40 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 2

Half Shaft external splined

Traxxas half shaft, external splined, for steel-spline constant velocity (#9051X or #9052X)
Content: 1 piece

21,80 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 2

Half Shaft external splined

Traxxas half shaft, external splined, for steel-spline constant velocity (#6851R #6852R #6451 #6452)
Content: 1 piece

8,50 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 2

Half Shaft internal splined

Traxxas half shaft, internal splined, for steel-spline constant velocity (#9051X or #9052X)
Content: 1 piece

21,80 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 2

Half Shaft internal splined

Traxxas half shaft, internal splined, for steel-spline constant velocity (#6851R #6852R #6451 #6452 #1951R)
Content: 1 piece

6,60 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 2

Housing Center Differential

Traxxas center differential housing, incl. x-ring gaskets, ring gear gasket, 2x bushings, and hardware

5,70 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 1

Motor Mount Aluminium

Traxxas motor mount, made of 6061-T6 aluminum, blue-anodized.

42,80 EUR

( 20 % VAT incl. excl. Shipping costs )

Product not available

In Stock: 0

Shipping time: Per Order

Motor Plate Aluminium blue

The machined Aluminum Motor Plate offers rock-solid mounting security for major horsepower.
Brilliant anodizing with bright aluminum highlights show off the artfully sculpted design.
Ideal for high-power brushless systems and a perfect complement to the Aluminum Motor Mount.

16,10 EUR

( 20 % VAT incl. excl. Shipping costs )

Product little available

In Stock: 1